DSD64/128 support. Up to 352.8k 24 bit sample rate. 75 Ohm output Impedance. 2Vrms, Better than 100dB (0.001%) THD+N, DNR better than 112dB A-weighted.
One year parts and labor. (Detailed Warranty information may be found under the “CONCERO” menu item on every page.)
- Plug CONCERO into an active USB port and CONCERO enumerates as an audio output device. Now you can use CONCERO with your favorite music player on the MAC or PC, and experience a new level of audio clarity. CONCERO will optionally up-sample your digital 44.1kS/s and 48kS/s provided over the USB, into both an analog output from its internal ESS Sabre DAC’s into your existing audio pre-amplifier inputs or to your headphones. CONCERO (not the HP version) is also capable of generating a 24 bit ultra low jitter SPDIF stream output.
If you prefer to provide your own data at higher than 48kS/s, all CONCERO models will render it bit-perfect into the DAC (and SPDIF stream if not HP) while providing exceptional jitter removal.
- Plug CONCERO into a power-only USB port (of the type used to charge cell phones or similar), and finding no active host, CONCERO will configure to accept SPDIF input. Once again offering to up-sample 44.1kS/s and 48kS/s into high quality 176.4kS/s or 192kS/s, or render it bit-perfect and jitter reduced into to the internal Sabre DAC for your pre-amplifier inputs or headphones.
CONCERO models respond to the Apple IR Remote for you to conveniently control the USB host track selection and play/pause, and on-the-fly select the ideal internal filter to suite your taste. No glitch or artifact is generated during filter switching, allowing you to audit the filters and choose the optimum. Pressing the volume control knob on the HP model also cycles through the filter selections.
*The CONCERO HD and CONCERO HP do indeed use the 32bit ESS9018-2M Sabre DAC but the data you send to our DACs is at most a 24bit word. What then is the reason to mention that the DAC is 32 bits? It is important, and it sounds better when the DAC is 32 bits, because of the signal processing the DAC must do can end up loosing information (ie making a very low level of noise) if the internal bus width cannot accommodate a dynamic range higher than the dynamic range of the input data word.
Update June 2013: the latest software for CONCERO enables 384kS/s mode! If you purchased a CONCERO at any time you can now upgrade your unit to 384kS/s. Check out the Software Updates for CONCERO page. We now provide both a PC and a MAC version of the CONCERO updater. Please note that the 384kS/s is the new highest rate that the CONCERO can take from your USB source (352.8kS/s is the highest rate CONCERO HP and CONCERO HD can take), the internal filters still up-sample by a factor of four to the 176.4kS/s or 192kS/s rates.
Downloading and Installing
Both of our CONCERO products (CONCERO HD and CONCERO HP) are upgradeable via a USB connection to a computer. We offer upgrade utilities for both the Windows platform (XP, Vista, 7 and 8) and Mac OS X. Please follow the instructions below to download the appropriate updater (the updater differs for each model of CONCERO).
Step 1: Install pre-requisites
The CONCERO updater requires the .NET framework. The .NET framework is installed by default on all modern Windows installations. However, on Mac OS X platforms you will need to load the Mono framework. The mono framework can be installed from here: Mono Framework.
Step 2: Download Installer
Please download the software that corresponds with your operating system:
Step 3: Unpackage Updater
Unzip the updater to a location of your choice.
Step 4: Perform Update
Run the CONCERO updater program while the CONCERO is plugged in via USB. The CONCERO updater requires the use of a USB 2.0 or USB 1.0 port to work properly. Once the updater has found your device you may follow the on-screen directions. Note: The updater computer will require an internet connection to retrieve the most up-to-date firmware for your device.
Step 5: Enjoy!
Enjoy the newly upgraded firmware on your CONCERO audio device! If you run into any issues while performing an upgrade, please try closing the updater, unplugging the CONCERO and then trying again.
Returning the CONCERO for Repair under Warranty
If you find any problems, faults or unexpected performance in the CONCERO unit in the first year of operation, it may well be covered by our warranty policy. The first step in returning a unit to Resonessence is to contact your local dealer, or directly by phone to us at our Canadian headquarters (778) 477-5536. We are in the North America Pacific Coast time zone and the country code for international calls is (1).
You may also email to email@example.com. Please be prepared to provide the unit serial number when requesting support and be sure to include it in any Email.
Resonessence is pleased to provide a one year warranty under the terms described below, but reserves the right to determine whether the warranty applies in each specific case. We will attempt to determine if the warranty is applicable in the initial contact you make with us or our dealers, but it may be necessary to return the unit for inspection to make the determination.
All returned items require a Return Materials Authorization (RMA) number which you will receive from us along with the shipping address to which the unit should be returned. Please mark the shipping box with the RMA clearly visible on the outside. We can only accept units for return or repair with the RMA attached.
By shipping a unit to us you agree to the terms and conditions of our repair and return policy, outlined below.
Subject to the conditions set forth below, for one year after the original purchase date of the unit (unless otherwise specified), Resonessence will repair, or if necessary replace, the unit at no additional cost, in the event of a defect in materials or workmanship of the hardware elements of the unit. This warranty is extended only to an original purchaser of the unit from an authorized reseller or directly from Resonessence. We do not provide a warranty of any kind if the unit has been purchased from an unrecognized or unauthorized reseller. We may request proof of purchase prior to providing any warranty service. We may, at our discretion, not extend the warranty to units used as rental units by a third party business if not approved by Resonessence or our authorized dealers.
This warranty only covers failures due to defects in materials or workmanship in the hardware elements of the system. Damages incurred in shipping, or due to accident, inappropriate use of the unit or power surges of any kind are not covered. Alterations to the unit undertaken by unauthorized individuals or organizations are not covered. Damage incurred during attempted reverse engineering, design data extraction or attempted internal measurements of any kind are specifically excluded from any warranty.
Installation of any unapproved software, or external algorithms of any kind designed to expose or debug the operation of the unit, or to circumvent or otherwise interfere with the unit’s unique identity code, causing damage or thereby erasing the unit’s operating system or similar, are not covered by any warranty. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHERS WHICH VARY FROM STATE/JURISDICTION TO STATE/JURISDICTION.
REPAIRS MADE UNDER WARRANTY
Resonessence will be responsible for all parts and labour necessary to fix defects in materials or workmanship of the hardware elements of the unit.
NON-WARRANTY REPAIRS ETC.
Resonessence will charge for a minimum two hours of work at the prevailing hourly rate, plus all shipping costs, for any unit returned that does not qualify for the warranty service, or is returned for upgrade, technical audit or software re-initialization. Upon receipt of the unit, we will inform you of the estimated cost of the work and await your approval to proceed. Note that in all cases, even if you do not agree to the additional work, you will be responsible for the minimum two hours and shipping costs.
Parts and labour costs incurred to complete non-warranty work, even in the case where they exceed our estimate, will be your responsibility.
REPLACED, REPAIRED OR UPGRADED PARTS
Any parts repaired or replaced either under warranty or as a paid service, are themselves warranted against defects in materials or workmanship for one year after the service date. Parts not replaced or repaired remain on the initial warranty schedule.
If a unit covered by warranty needs servicing during the first 30 days after the original purchase date, Resonessence will cover the cost of shipping the unit back, as well as the return shipping to you. After this initial 30 day period, and for one year after the original purchase date, Resonessence will only cover the cost of shipping the unit back to you, and you are responsible for the cost of shipping the unit to Resonessence. You are responsible for all shipping costs both to and from Resonessence for non-warranty work. You are responsible for paying all taxes, import duties, or similar fees imposed by foreign countries or other jurisdictions.
LIMITS AND EXCLUSIONS
RESONESSENCE DOES NOT, BY VIRTUE OF THIS DOCUMENT, OR BY ANY COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE, MAKE ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE OR NONINFRINGEMENT, AND ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. RESONESSENCE EXPRESSLY DISCLAIMS ANY IMPLIED INDEMNITIES. RESONESSENCE SHALL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE, SPECIAL OR EXEMPLARY LOSSES OR DAMAGES, INCLUDING, WITHOUT LIMITATION, DAMAGES TO RECORDINGS, DATA STORAGE DEVICES, TAPES, DISKS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, LOSS OF GOODWILL, COVER, OR OTHER PECUNIARY LOSS, ARISING OUT OF OR RELATING TO THE USE OF ANY PRODUCT, OR ARISING FROM BREACH OF WARRANTY OR CONTRACT, NEGLIGENCE, OR ANY OTHER LEGAL THEORY, EVEN IF RESONESSENCE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES OR DAMAGES. ANY DAMAGES THAT RESONESSENCE IS REQUIRED TO PAY FOR ANY PURPOSE WHATSOEVER SHALL NOT EXCEED THE ORIGINAL COST PAID TO RESONESSENCE FOR THE APPLICABLE UNIT. BECAUSE SOME STATES/JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE FOREGOING LIMITATION MAY NOT APPLY TO YOU.